Safety Instructions
warning
Please read these instructions completely before putting on or using the Exoskeleton Glove V2 to ensure the safety of personnel and equipment.
1. User Requirements
- Do not use the glove if you have open wounds, inflammation, skin conditions, nerve damage, or abnormal sensation in your hands or arms.
- Remove watches, rings, bracelets, and other hard accessories before putting on the glove to avoid scratching the device or compressing your skin.
- First-time users should complete the initial setup in a stationary, well-lit environment and verify that the glove pose matches the hand pose before proceeding.
- Children, pregnant women, and people with epilepsy or photosensitive epilepsy should use vibration feedback and visual interface features only under professional guidance.
2. Wearing and Operating Safety
- Proper wearing: Align your fingers with the glove finger stalls and slide them in slowly. Do not pull cables forcefully or bend joint structures. After wearing, your fingers should be able to flex naturally without tightness or obvious pressure.
- Take breaks: We recommend removing the glove for 5–10 minutes after 30–40 minutes of continuous use to avoid hand fatigue, numbness, or skin discomfort caused by prolonged vibration or restraint.
- Vibration feedback: If you feel stinging, burning, or significant discomfort during use, stop immediately and remove the glove.
- Avoid cable strain: When using a wired connection, do not stand up suddenly or swing your arms to prevent cable strain, interface damage, or device drops.
- Wireless module: The wireless module generates heat during operation. Do not cover the module surface with fabric or other insulating materials. If it becomes noticeably hot, pause use and check the module status.
- Correct use of the finger control unit: Before enabling motion capture, make sure the joysticks on the finger control unit are in their initial center position. Operate the joysticks only after motion capture has started.
3. Battery and Charging Safety
- Charge the wireless module only with the official charger and cable.
- Charge in a ventilated, dry, and room-temperature environment. Avoid charging near high temperatures, moisture, or flammable materials.
- If the battery is swollen, leaking, emitting odor, or abnormally hot, stop charging and using it immediately, and contact after-sales support.
- For long-term storage, keep the wireless module battery level around 40%–60% and store it in a dry, cool place.
4. Environment and Maintenance
- Use the glove within the working temperature (0 °C ~ 40 °C) and humidity (10% ~ 90% non-condensing) ranges stated in the specifications.
- Keep the glove away from water, oil, chemical solvents, and sharp objects. Clean the surface with a dry or slightly damp soft cloth. Do not soak or wash the glove.
- When not in use, lay the glove flat or hang it on a dedicated stand. Avoid cable bending, compression, or leaving the glove in extreme poses for long periods.
5. Disclaimer
These safety instructions provide general guidance only. Users are responsible for ensuring that the use environment, personnel training, and safety measures comply with local laws and regulations. IO Intelligence is not liable for equipment damage, data loss, or personal injury caused by violation of these instructions or improper operation. Users should assess and bear the relevant risks themselves.
This device must not be used in high-risk scenarios involving personal safety. If users apply this device to high-risk applications, IO Intelligence assumes no responsibility.